Retopologiyu and correcting scanned 3D models
Retopologiyu scanned 3D models
Often, when scanning objects we get a 3D model of low quality. Scanned 3D models have rough surfaces and "smooth" the internal and external faces. Another problem with the 3D scanning are hidden inner surface scanner access to which is restricted.
The manufacture of furniture and decor elements CNC according to 3D models have problems with the quality of the treated surface, increasing the cutting elements on the machine, and the time grinding manufactured elements.
To correct these errors in the 3D scanning 3D models used retopologiyu.
Retopologiyu - this reshaping the mesh to obtain the necessary forms surfaces and edges.
Here you can order retopologiyu scanned 3D models of any complexity.
Pic. 1 - Example retopologiyu decorative overlay.
Stitching multiple scanned 3D models into one
To scan volume elements (example Pic. 2) we need to have expensive equipment that performs 3D scan, or do the so-called 2,5D scanners, through which we get a few 3D models from different sides. With the latter method, the scanning problems basing on 3D models and workpiece during machining.
This problem is solved with the help of cross-linking (association) scanned 3D models into one. Another advantage of this method is that when a 3D model is obtained by combining high surface quality.
Pic. 2 - Example of stitching decorative console.
Scanned on two sides console 3D Model stitched console